Easy Laser E960 A Turbine Alignment


Reliability and Precision
The Easy-Laser E960 Turbine alignment systems make the measurement and adjustment work of diaphragms and bearings easier thanks to the wireless detector unit and measurement programs that guides one through the measurement process.  The versatile design solves the straightness measurement problems quickly and with precision for any kind of application. Objects up to 40m far can be measured. The Laser detector reads measurement values with a resolution of 0.001 mm.

Easy-Laser E960-A and Easy-Laser E960-B
Two versions. Easy-Laser E960-A has a measuring probe with a stroke of 10 mm. The slidable tube makes it possible to measure several positions in a row without moving the bracket. Suitable for gas turbines and smaller steam turbines.
Easy-Laser E960-B has a measuring probe with a stroke of 60 mm. This system is suitable for larger turbines. Software, laser transmitter and detector are common to the systems. The detector brackets differ. See system content further down the page.

Versatile Programs
The straightness programs of the E960 system are very versatile. You can add, remove and remeasure measurement points at any time during the measurement.  You can include both full bores and half bores in any possible combination in one measurement, the program will calculate the correct centre line in all cases. The measurement program includes many different methods for straightness measurements like single point, 4-point, multipoint (also roundness ), and 3-point measurements.
Thanks to the large colour display with clear graphs and measurement data, one can evaluate the result directly on site. Any point can be set as reference and one can set an offset to which the centre line will be recalculated.  The results can be checked against a tolerance value. The measurement system takes care of all these complicated calculations inside the display unit.


1 Laser transmitter D75
1 Detector E4
1 Display unit
1 Bluetooth® unit
1 Cable 2 m
1 Cable 5 m (extension)
1 Offset hub for D75
1 Transmitter bracket, with 3 magnet bases
1 Detector bracket Short stroke, with 2 magnet bases
1 Detector probe top set
2 Targets for centering of brackets
1 Manual
1 Measuring tape 5 m
1 USB memory stick
1 USB cable
1 Battery charger (100–240 V AC)
1 Toolbox
1 Shoulder strap for display unit
1 Cleaning cloth for optics
1 CD with documentation
1 Carrying case (with wheels