Easy Laser E950 A Medium Bore Alignment System


Bore and Straightness Alignment:  140 – 500mm diameter

Easy-Laser® E950-A, Easy-Laser® E950-B and Easy-Laser® E950-C
We offer three versions of the measurement system. Easy-Laser® E950-A is primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications.
Easy-Laser® E950-B is primarily for propeller shaft installations on ships with stern tubes, support bearings, gearboxes and engines.
Easy-Laser® E950-C is primarily for diesel engines (for example crank and camshaft bearings), gearboxes, compressors and similar applications, where small diameters have to be measured.

The Easy-Laser® E950 laser alignment system makes checking and aligning bearings and bearing journals easier thanks to Bluetooth wireless detectors and versatile brackets. A large colour display with clear graphics and software that guides the user through the measurement process makes it simple to operate. The system automatically calculates the bearing journals in relation to each other, both horizontally and vertically. You can then evaluate the results directly on-site with different calculation methods such as Best fit around zero and Waviness. It is also possible to analyse the different choices of reference points and set the offset and tolerance values. The Ovality check can be used to analyse the wear rate. You can measure and align both full and half bearing journals with equal simplicity. All parts are designed for maximum accuracy and stability and can measure with a resolution of 0.001 mm – measurement distance up to 40 m.


1 Laser transmitter D75
1 Detector E7
1 Display unit
1 Bluetooth unit
1 Cable 2 m
1 Cable 5 m (extension)
1 Offset hub for D75
1 Set of offset hub arms, diam100-500mm
1 set of magnets for offset arms
1 Set of rods A
1 Slide bracket Min diam 120mm
1 Slide bracket Min diam 200mm
1 Slide bracket Min diam 300mm
1 Rods – 4 x 60mm
1 Rods – 4 x 120mm
1 Rods – 2 x 30mm
1 Rods – 2 x 240mm
1 Magnet base
1 Large target
1 Manual
1 Measuring tape 5 m
1 USB memory stick
1 USB cable
1 Battery charger 240 VAC
1 Toolbox
1 Shoulder strap for display unit
1 Cleaning cloth for optics
1 CD with documentation
1 Carrying case